With the RZ350 off to paint. The BSA is up on the lift getting worked on. One of the problems that was always going to have to get sorted was the original stock swingarm was bent. This apparently is a common problem with these bikes. Top on the list to replace the stock swingarm was the A&A swingarm. For AHRMA racing, its the only acceptable replacement and upgrade. However, these things are impossible to find. I had just about resorted to building my own swingarm when one came up on eBay.

• 

• 

• 

• 

After several years of searching, I finally have one to use on my build. Nothing is cooler than period race parts.

Next up…….new wheels and making it a roller